Tag Archives: 7.5t

Isuzu 7.5t Choice Delivers For P&H Direct

P&H Direct Isuzu 7.5t truck

One of Palmer and Harvey’s new Isuzu 7.5t trucks, which will be used for its P&H Direct operation, servicing food service outlets.

When Palmer and Harvey rolled out its new nationwide van sales food service operation last month under the ‘P&H Direct’ banner, the vehicle fleet used for this service is based on 50 Isuzu Forward N75.150 7.5t rigid vehicles. The trucks were specifically purchased for this brand new initiative and all specified with purpose-designed Paneltex bodywork.

The addition of these 50 new vehicles now means that Palmer and Harvey’s national vehicle fleet currently incorporates over 110 Isuzus covering a range of distribution applications, all at 7.5 tonnes GVW.

P&H Direct is a brand new van sales operation set up by Palmer and Harvey to service retail food outlets such as cafes, snack bars, garden centres, sandwich shops and pubs – this move into food service is a first for the wholesaler.

Each Isuzu vehicle stocks market-leading FMCG lines including crisps, countlines chocolate, chilled drinks, chewing gum and key catering essentials such as tea and coffee. A FMCG category specialist, who can provide expert advice to any of the outlets on ranging, merchandising and promotions, staffs each vehicle.

According to Huw Davies, Managing Director at P&H Direct:

“We pride ourselves on providing the most reliable distribution service to our customers and for this we require a dependable vehicle fleet. As a company, Palmer and Harvey has operated Isuzu trucks for well over 10 years within its national fleet and the proven performance and reliability of the products, supported by unrivalled customer service, is second to none. Furthermore, the payload capacity we achieve from the Isuzus is by far the best in the industry.”

These latest 7.5t Isuzus all feature Isuzu’s popular Easyshift transmission and Hull-based manufacturer Paneltex was chosen as the exclusive supplier of bodywork for the vehicles. Each truck has an extra-long Paneltex Ecofont S dry-freight body, which has an interior length of 6100 mm. Whilst the dry-freight body is principally designed for ambient products; there is a provision for chilled products through the supply of a mobile refrigeration unit within each truck. Mounted on castors, the container has an approximate capacity of 500 litres and is fitted with a top-mounted fridge that can be plugged into either 12 V DC or 240V A/C supply.

To facilitate ease of access into the truck body for the driver/salesman, there is a single, centre rear door with double-folding step. The body also has a compact Penny Hydraulics Load Lift 250 platform at the rear that can handle the loading and unloading of roll cages and trolleys up to 300kgs. Within the body itself, there is a specific office facility with additional electronics for iPads and overall vehicle security is provided through Maple, Twin-Active, Lock-Secure systems to the rear door.

According to P&H Direct, these new Isuzu trucks will each have a working life of seven years covering approximately 20,000 miles per annum operating as sales vans working on a localised geographical area.

Van Models Guide Part 5: 7.5 Tonne Lorries

7.5t box lorry with tail lift

7.5t lorries are considerably bigger than vans. If you are driving one for the first time, you will need to take care.

So far in this series, I’ve looked at small, medium, large and luton vans. But what if you need something bigger still?

In terms of van hire, the main option available if you need something bigger than a luton or extra-long wheelbase panel van is 7.5t truck hire.

7.5 tonne lorries are far larger than even the largest of vans but also have a much greater payload. The difference between weight and space is important – sometimes, vans cannot carry enough weight, even when they have enough space.

As a general rule, a 7.5 tonne lorry will have a payload of around 3,000kg – approximately 2-3 times that of most 3.5 tonne vans. This will vary depending on the lorry’s body, make and model and whether it has a tail lift.

Can I Drive A 7.5t Lorry On My Car Licence?

Many drivers can drive 7.5t lorries on their car licences – it depends on when you passed your car driving test.

Drivers who passed their car test before 01/01/1997 should have category C1 on their driving licence. C1 is required to drive a goods vehicle with a maximum laden weight of between 3,500kg and 7,500kg.

Drivers who passed their car test after 01/01/1997 will not have C1 entitlement unless they have taken an additional C1 driving test.

You should also be aware that if you are driving a 7.5t lorry for hire or reward (i.e. not purely for personal use, such as moving house) you will be subject to tachograph rules.

As the driver, it is your responsibility to be aware of this and to comply. The Business Link website has a good introductory guide to tachograph law and the Direct Gov website is the best place to start if you are looking for information about driving licence requirements for goods vehicles.

About 7.5t Lorries

As their name suggests, 7.5t lorries have a MAM of 7,500kg. This class of vehicle really includes all goods vehicles (vans and lorries) with a MAM (maximum laden weight) of between 3,500kg and 7,500kg.

Speed limits for lorries up to 7.5t are the same as for vans up to 3.5t:

  • Single carriageways: 50mph
  • Dual carriageways: 60mph
  • Motorways: 70mph

However, almost all vans and lorries over 3.5t are now fitted with speed limiters set to 56mph, so the dual carriageway and motorway speed limits are now irrelevant.

Driving 7.5t Lorries

If you have not driven a lorry before, you will find driving a 7.5t truck quite different to driving a van or car.

The seating position places you directly above the front wheels, meaning that you are further forward in the vehicle than you are used to and may feel that you have to turn into corners later than usual in order to get the correct line (and avoid the pavement).

Similarly, braking and handling will be quite different to a van or car and the handbrake is likely to be an air brake, controlled by a lever on the dashboard.

On top of all of this, a 7.5t box lorry will be much wider, higher and longer than anything you have driven before. Make sure you know the overall height and width of the vehicle and keep an eye out for low bridges and other restrictions. Do not turn into roads with a signposted 6’6″ width restriction – you will get stuck.

Make sure your mirrors are correctly adjusted and that you understand how to use them to check the space around you. Be careful and don’t try to rush.

Disclaimer

All the information in this article is provided for information only and is especially not intended to be a definitive statement on tachograph law. If you need to know the exact dimensions or payload of the vehicle you are hiring, you will need to speak to the company concerned when making your booking.

It is standard practice in the car and van hire industry to specify a ‘typical’ model when customers make bookings – this won’t necessarily be the exact make or model you get. Usually, this doesn’t matter, but it can do if space or weight is tight.